Aerospace
Aerospace Data and Equipment Destruction, ITAD and Recycling
Aerospace manufacturers and suppliers hold export-controlled technical data, proprietary designs, and prototype hardware that must be destroyed under control when retired. All Green Recycling provides data and equipment destruction, IT asset disposition, and zero-landfill recycling with methods that follow NIST SP 800-88 Rev. 2, supporting ITAR and supply-chain obligations, documented on a Certificate of Destruction for every job.
Aerospace Data and Equipment Destruction and Secure Asset Disposal
Aerospace is one of the most tightly controlled industries in the world. Manufacturers, suppliers, and MRO providers hold export-controlled technical data, proprietary designs, flight-test results, and prototype hardware whose release to the wrong party can breach federal law and hand competitors or adversaries years of work. When the equipment that held that information reaches end of life, destruction is an export-control and contractual obligation.
All Green Recycling provides aerospace organizations with witnessed, documented destruction of data-bearing media and sensitive equipment, plus full-lifecycle disposition. Methods follow NIST SP 800-88 Rev. 2, the recognized media-sanitization standard, and every asset is tracked from pickup through destruction in the Green Pulse® portal. Each engagement closes with auditable evidence built for export-control compliance and supply-chain audit.
ITAR, EAR and Export-Controlled Technical Data
Aerospace technical data routinely falls under ITAR or the EAR, which restrict access to defense and dual-use technology and penalize unauthorized release. Retired drives, design workstations, and test equipment can hold export-controlled data, and disposal through an untracked route is a diversion risk. All Green Recycling applies a tracked chain of custody from pickup through destruction so controlled data is destroyed under control.
Equipment and Prototype Destruction
Aerospace information is embedded in hardware as much as in data. Prototypes, tooling, test articles, and specialty components can reveal design and capability if they survive intact. All Green Recycling destroys equipment as well as data-bearing media, matching the method to the item and recording it on the Certificate of Destruction.
Why Aerospace IT Disposal Differs from General Recycling
Aerospace disposal answers to a higher standard than commercial recycling because the data and hardware are export-controlled and proprietary, and a leak can mean a federal violation or lost design advantage. The method must match the sensitivity, the chain of custody must be unbroken, and the evidence must satisfy an export-control or supply-chain auditor. All Green Recycling provides witnessed destruction to NIST SP 800-88 Rev. 2 and tracks every asset in the Green Pulse® portal.
Three constraints shape the aerospace lifecycle. First, export-controlled technical data under ITAR and EAR must not be diverted on retired media. Second, the threat extends to prototypes and hardware that reveal design and capability. Third, AS9100 supply-chain quality and traceability expectations extend to how a supplier disposes of sensitive material. See NIST SP 800-88 and CMMC Media Sanitization for the governing references where defense data is involved.
Every engagement closes with auditable proof. A Certificate of Destruction documents the sanitized media and destroyed equipment, and a Certificate of Recycling documents responsible, zero-landfill handling of the remaining hardware.
| Stat | Label | Source |
|---|---|---|
| ITAR | Restricts release of defense-related technical data | 22 CFR Parts 120-130 |
| EAR | Controls dual-use technical data | 15 CFR Parts 730-774 |
| NIST SP 800-88 Rev. 2 | Media-sanitization benchmark (Clear, Purge, Destroy) | NIST |
| Witnessed | Destruction observed and recorded for program assurance | All Green Recycling service spec |
Which Regulations and Frameworks Govern Aerospace IT Disposal?
Export controls, supply-chain quality standards, and supporting sanitization guidance set the requirements for retiring aerospace data and equipment, alongside the referenced industry frameworks.
| Regulation or framework | Citation | What it means for your company |
|---|---|---|
| ITAR | 22 CFR Parts 120-130 | Defense-related technical data must not be released to unauthorized parties, including via disposal. A tracked chain of custody prevents diversion. |
| EAR | 15 CFR Parts 730-774 | Dual-use technical data is export-controlled and must not be diverted on retired media. |
| AS9100 | SAE / IAQG aerospace quality standard | Supply-chain traceability and quality expectations extend to disposal of sensitive material. All Green Recycling’s documentation supports supplier audits. |
| NIST SP 800-88 Rev. 2 | Section 4 (Clear, Purge, Destroy) | The media-sanitization standard All Green Recycling’s data destruction follows. |
| CMMC 2.0 | DoD; built on NIST SP 800-171 | Aerospace contractors handling CUI must implement media-protection practices. See CMMC Media Sanitization. |
| NAID AAA Certification (referenced framework) | Administered by i-SIGMA | An i-SIGMA accreditation program that audits secure data-destruction providers against chain-of-custody, employee-screening, and destruction-method requirements, verified through scheduled and unannounced audits. |
What Pain Points Does All Green Recycling Solve for Aerospace?
Aerospace buyers face four recurring problems when retiring data and equipment, and All Green Recycling answers each with a specific process or document.
| Concern | How All Green Recycling answers it |
|---|---|
| Export-controlled data could be diverted. | A tracked chain of custody from pickup through destruction prevents diversion of ITAR and EAR-controlled technical data, documented end to end. |
| Prototypes and hardware reveal design. | Equipment destruction physically destroys prototypes, tooling, and test articles so design and capability cannot be recovered. |
| Supply-chain audits scrutinize disposal. | Each job produces a Certificate of Destruction, serialized inventory, witness record, and chain-of-custody log, supporting AS9100 and customer supplier audits. |
| CUI on contractor systems must be protected. | High-confidentiality media is destroyed under NIST SP 800-88 Rev. 2 to support CMMC media-protection obligations. |
What Documentation Does an Aerospace Client Receive?
Every aerospace engagement produces a documented audit trail built for export-control and supply-chain review.
| Document | Purpose |
|---|---|
| Certificate of Destruction | Per-job proof that media and equipment were destroyed, listing method, NIST category, date, and chain-of-custody reference. |
| Certificate of Recycling | Documents responsible, zero-landfill downstream handling of retired electronics. |
| Chain of Custody Log | Tracks each asset from pickup through destruction with timestamps, captured in the Green Pulse® portal. |
| Serialized Inventory | Asset-by-asset record with serial numbers, reconciled against the pickup manifest before destruction. |
| Witness Record | Documentation of the authorized personnel who observed witnessed destruction. |
Frequently Asked Questions: Aerospace Data Destruction and Recycling
How do you handle ITAR and EAR-controlled technical data?
Aerospace technical data routinely falls under ITAR or the EAR, which penalize unauthorized release. All Green Recycling applies a tracked chain of custody from pickup through destruction, with a serialized inventory and Certificate of Destruction, so export-controlled data is destroyed under control rather than diverted on retired media.
Do you destroy prototypes and hardware, not just drives?
Yes. Aerospace information is embedded in prototypes, tooling, test articles, and specialty components. Equipment destruction physically destroys these items so design and capability cannot be recovered, with the method recorded on the Certificate of Destruction alongside data-bearing media.
Can our customers witness destruction for supply-chain audits?
Yes. Witnessed destruction lets authorized personnel observe the process, and the witness is recorded on the destruction documentation. That observed step gives a defensible record for AS9100 and prime-contractor supplier audits.
How do you support CMMC obligations for aerospace contractors?
Aerospace contractors handling CUI must implement media-protection practices that point to NIST SP 800-88 for sanitization. All Green Recycling destroys retired media to NIST SP 800-88 Rev. 2 and documents it on a Certificate of Destruction, evidencing the media-disposal practice for your assessor.
What happens to the equipment after destruction?
After media and equipment are destroyed, the remaining materials move through responsible recycling to a zero-landfill standard under EPA RCRA. Materials are recovered through downstream partners and documented on a Certificate of Recycling.
Request Aerospace Data and Equipment Destruction
All Green Recycling provides aerospace organizations with witnessed, documented destruction of export-controlled media and sensitive equipment, built for ITAR and supply-chain scrutiny. Contact us today to request a quote or schedule a pickup, and we will issue a Certificate of Destruction and a Certificate of Recycling for every job.
Need secure data destruction services for Aerospace Data and Equipment Destruction, ITAD and Recycling?
Bonded · Insured · Certificate of Destruction · Methods follow NIST SP 800-88 r2